Compatibility Properties Setup

Compatibility Properties are used to make the generated scripts work with an existing ASP application.

If your ASP application generated by ASP Report Maker is standalone, that is, resides in a separate folder from other ASP application, there is no need to set these properties.

However, if you mix the generated scripts with other ASP application in the same folder, the generated header, footer, login, logout and default pages may overwrite the same pages for the existing ASP application because these file names are typical and both applications possibly have the same file names. For example, if you generated the output scripts to the same destination folder of an ASPMaker project, those files will be overwritten.

If the Compatibility Properties are enabled, during script generation, the header, footer, login, logout and default pages can be skipped so they won't overwrite existing files. Instead, the generated scripts will use the paths of header, footer, login, logout and default pages specified by the Compatibility Properties so both ASP application shares the existing files. Therefore, once you have customized the header and footer for use with both ASP applications, they will not be overwritten the next time you re-generate scripts using ASP Report Maker.

Note The header and footer files are included in the script using <!--#include file="filename.ext"-->. If you generate the output scripts to a folder at a level different from the existing ASP application, do NOT use Compatibility Properties unless you are sure that your header and footer work fine at different level. For example, if relative paths are used in the header and footer, the paths will be translated to different paths when the header or footer is includes by scripts at different levels.

 

Set up the Compatibility Properties Automatically (Requires ASPMaker 2017 or Later)

If the existing ASP application is generated by ASPMaker 2017 or later, the compatibiltiy can be set up easily in the ASPMaker project. ASPMaker can load the ASP Report Maker project, set up the compatibility properties automatically and load the menu items from the ASP Report Maker project to the ASPMaker project. Since ASPMaker will update your ASP Report Maker project, to avoid overwriting each other, you should save your ASP Report Maker project and close ASP Report Maker first. Then in ASPMaker, open the Menu Editor, click the [Import] button in the toolbar,

Note: This is menu editor in ASPMaker.

Select your ASP Report Maker 10 project, then click [OK]. The imported menu items will be represented by orange icons, you can then re-arrange the display order of the menu items if necessary.

If you re-open the ASP Report Maker project in ASP Report Maker, click [Tools] -> [Compatibility Properties] and you'll see that the compatibility properties has been setup.

Note If you change User Level settings in your ASP Report Maker project later, the imported menu items in the ASPMaker project will NOT be updated automatically, you'll need to repeat above again.

 

Set up the Compatibility Properties Manually

If the existing ASP application is not generated by ASPMaker, you can also set up the Compatibility Properties manually. In ASP Report Maker, click [Tools] -> [Compatibility Properties], the following form will show up:

Properties:

Project Name

Specifies the project name of the project.

In our products, project name is generally used in session variable names to distinguish projects. To make your ASP Report Maker project works with our other products, for example, ASPMaker, you must use the same project name.

Normally, the project name is the same as the project file name, but there are cases that the project name is different, it is therefore recommended that you check the project name of the ASPMaker project first (see Project File), then you enter the same project name to ASPMaker. In ASP, project name is case-insensitive.

Notes
  1. If you don't use security, there is no need to change the project name.
  2. If you save the project as the another file name using [Save As...], the project name will still be changed accordingly. If you want to keep the project name unchanged, use [Save a Copy...]. (See Project File)
Enable compatibility properties

Check this to enable compatibility properties.

Header (include file)

Specifies the path of the header include file.

Default value is "(Template)", which means the path is determined by the template.

When enabled, the path you enter will be used in the generated script as follows:

<!--#include file="your header path"-->

Footer (include file)

Specifies the path of the footer include file.

Default value is "(Template)", which means the path is determined by the template.

When enabled, the path you enter will be used in the generated script as follows:

<!--#include file="your footer path"-->

Login page

Specifies the path of the login page.

Default value is "(Template)", which means the path is determined by the template.

When enabled, the path you enter will be used in the generated script as follows:

Response.Redirect "your login page" or <a href="your login page">...</a>

Logout page

Specifies the path of the logout page.

Default value is "(Template)", which means the path is determined by the template.

When enabled, the path you enter will be used in the generated script as follows:

<a href="your logout page">...</a>

 

Default page

Specifies the path of the default page.

Default value is "(Template)", which means the path is determined by the template.

When enabled, the path you enter will be used in the generated script as follows:

Response.Redirect "your default page"

Note If compatibility properties is enabled but the path is empty, the file in the template will still be generated by ASP Report Maker and used by other generated scripts as normal.

 

 

Also See:

Tutorial - Compatibility Properties - Integrating with existing ASPMaker project

 

 

 

 ©2006-2017 e.World Technology Ltd. All rights reserved.